Ametek Land LANCOM 4 - Setting the Date and Time; Changing the Measurement Units

5 - 1
Lancom 4Portable Flue Gas Analyser
User Guide
5 Setting up the Analyser
5.1 Setting the Date and Time
The date format is DAY:MONTH:YEAR.
1) In the Main Menu screen, use the up/
down arrow keys to the highlight the
Settings option, then press the enter
key.
The Settings screen is displayed.
2) Use the up/down arrow keys to highlight the Date and Time option,
then press the enter key.
The Date and Time settings screen is displayed.
3) Use the up/down arrow keys to highlight the required option (year,
month, hour etc.). Use the left/right keys to select the required value
for the selected option.
4) When you have set the correct date and time, press the enter key to
save the settings.
5) Press the exit button to return to the Settings screen.
To return to the Main Menu screen, press the Home button.
5.2 Changing the Measurement Units
The menu sequences for changing measurement units are listed below.
Each sequence assumes that you are starting from the Main Menu screen
Temperature Units
Main Menu > Settings > Units and Settings > Temperature
Options: Celsius , Fahrenheit
Gas Concentration Units
Main Menu > Settings > Units and Settings > Display Units
Options: mg/Nm
3
, ppm
Units of Pressure (Draft Readings)
Main Menu > Settings > Units and Settings > Units of pressure
Options: inH
2
O , hPa
Note: the units hPa and mb are numerically equivalent so that 100 hPa = 100 mb
Hydrocarbon Concentration Units
Main Menu > Settings > Units and Settings > CxHy
Options: % , ppm