Ametek Land LANCOM 4 - Changing the Filters

Portable Flue Gas Analyser
User Guide
Lancom 4
11 - 6
11.4 Maintenance Instructions
Theltersmustbereplacedinthecorrectposition.
Changing the Filters
1) Push over the wire clip and
removeeachlter.
2) Remove the two protective caps
fromeachreplacementlter.
3) To avoid air leaks make sure the
ltersarepushedfullyintothe
analyser.
4) Pullthewireclipovereachlter.
2
1
4
5
3
Wire clip
GasPre-lter
CO Compensation
lter
Item Description Part Number
1 O-Ring 319.211
2 Sinter Filter 702.182
3 Catch-pot Assembly 704.344
4 Gasket 319.250
5 Catch-pot 701.828
11.5 Probe assembly and Catch-pot parts