Ametek Land LANCOM 4 - Management of Log Files

7 - 3
Lancom 4Portable Flue Gas Analyser
User Guide
Todeneyourlocationtags:
1) UseatexteditorsuchasWindowsNotebooktocreatealecontaining
the location tags you need, with each tag on a separate line. Tags can
contain any alphanumeric or punctuation character.
2) ConnectaUSBcablebetweenthePCandLancom4andsavetheleto
theLancom4aslename“Datalogs\locs\locs.txt”.
A“locs.txt”leonlyneedstobeuploadedonce,butitcanbeupdatedat
any time using the procedure above.
Toselectalocationtagforaspecicmeasurement:
1) From the Main Menu, select the Settings option.
2) Select the Data log option.
3) Select Use Location Tags and choose “Yes”.
4) Press Exit.
5) Return to the Readings screen and press ?.
You will be prompted to select a location tag.
6) Thelocationtagwillbeusedtoidentifythelogle.Forexample,thetag
“BoilerEast”wouldproducealoglename“Lancom4BoilerEast.csv”.
7) Each time a new data entry is logged, it will be appended to the selected
logle.
7.3 Management of log files
The Data Log File Management option in the Lancom 4 software allows
youtomoveorcopydataloglesfromyourLancom4ontoaUSBmemory
device.YoucanalsodeleteunwanteddataloglesfromtheLancom4.
1) Insert a USB Memory device* into the USB connector on the front panel
of the Lancom 4.
2) From the Main Menu, select the Maintenance option.
3) Select the Data Log File Management option.
 AlistofthedataloglesstoredintheLancom4isdisplayed(lesare
in *.csv format).
4) Selecttherequireddatalogleandpressenter.Thefollowingoptions
are displayed:
• Delete
• Move to USB Memory*
• Copy to USB Memory*
*Note: If no USB device is connected, only the Delete option is
available.
5) Selecttherequiredoptionforyourdatalogle.