Ametek Land LANCOM 4 - Page 76

Portable Flue Gas Analyser
User Guide
Lancom 4
15 - 6
Icon Function See Insight
User Guide
Section
Data Table Tools
Insert a new table 9.1
Delete the current data table 9.1
Rename the current data table 9.1
Conguretheinputparametersforthecurrenttable 9.2
Insert a new data column into the table 9.1
Delete the current column from the data table 9.1
Insert an Alarm setpoint 9.4
Edit the current data column 9.2
Enable the table scrolling while data is being captured
Disable the table scrolling while data is being captured
Insert a new frequency distribution table from the current
selected area of the table
Remove the frequency distribution from the current table
Calculate and insert a summary data table for the current
table between the selected cursor range
Edit a summary data table row calculation 9.10
Insert a new data table row in a summary data table 9.9
Remove the current data table row from the summary data
table
9.11
Delete the current Summary data table
Graph Tools
Insert a new graph 10.2
Close the current graph 10.13
Customise the current graph 10.5
Insert a new frequency distribution graph from the current
table
10.1
Remove the frequency distribution graph
Customise the graph colours setup 10.9
Print the current graph 10.12
Format the page prior to printing 10.11