Ametek JOFRA ATC-156 B - Saving a Setup; Adjusting the Display Contrast; Altering Temperature Display Settings

52 23-03-2009 105446 06

Press
(setup page 1) to select Load setup.

Use the keyboard to select a calibrator setup number (1–9).

Press
to load the selected setup. A warning informs you
that the active setup will be overwritten.

Press
if you are sure you want to overwrite the existing
setup and return to the setup menu.
4.8.2 Saving a setup
Saving a setup, saves all the parameters in the Setup menu.

Press
(setup page 1) to select Save setup to registry.

Use the keyboard to select a register number (1–9).

Press
to save the current setup in the selected register
and return to the setup menu.
4.8.3 Adjusting the display contrast

Press
(setup page 1) to select Display contrast.

Press
to make the display darker or to make the
display lighter.

Press
to accept the new setting and return to the setup
menu.
4.8.4 Altering temperature display settings

Press
(setup page 1) to select the Temperature menu.