Name: Ametek Surgex UPS-17202-53R
Brand: Ametek
Rating: 5 (1 reviews)

To Next Page

To Previous Page

User Manual

_________________________________________________________________

5.1.2 LCD Display in Standby Mode

Rack Display Tower Display

5.2 Turn on the UPS (Put the UPS in On-Line Mode)

When the input voltage is within the acceptable range press and hold the

“ON/Mute” button for at least two seconds. A few seconds later the UPS

will turn on and enter on-line mode. “ONLINE” will be displayed in the

UPS status window on the LCD display. The UPS will provide pure and

stable AC power to the output. The UPS will also charge the batteries.

5.2.1 LCD Display in On-Line Mode

Rack Display Tower Display

5.3 Connect Devices to the UPS

After the UPS has been turned on, devices (load) can now be connect-

ed to the UPS. For socket-type outputs, there are two kinds of outputs:

programmable outlets and general-purpose outlets. Connect non-critical

Questions and Answers:

Need help?

Do you have a question about the Ametek Surgex UPS-17202-53R and is the answer not in the manual?

Ametek Surgex UPS-17202-53R Specifications

General