Ametek Surgex UPS-17202-53R User Manual

User Manual
_________________________________________________________________
© 2019 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / surgex.com 40
Warning
Icon (flashing)
Code
Alarm
Battery Fault
Beeps Once Every Second
Bypass Out Range
Beeps Once Every Second
Bypass Frequency
Unstable
Beeps Once Every Second
EEPROM Error
Beeps Once Every Second
9.5 UPS Fault
When there is a fault with the UPS the fault icon flashes on the LCD
display. A fault code will also be displayed directly below the flashing
fault icon. When a fault occurs no output power is supplied from the UPS.
9.5.1 LCD Display in Fault Mode
Rack Display Tower Display
9.5.2 Fault Reference Code
Fault Event
Fault
Code
Icon
Fault event
Fault
Code
Icon
Bus Start Fail
01
x
Low Inverter Voltage
13
x
Bus Over
02
x
Inverter Output Short
14
Bus Under
03
x
Battery Voltage Too
High
27
x
Bus Unbalance
04
x
Battery Voltage Too
Low
28
Bus Short Circuited
05
x
Over Temperature
41
x
Inverter Soft Start Fail
11
x
Overload
43
High Inverter Voltage
12
x

Ametek Surgex UPS-17202-53R Specifications

General

Brand	Ametek
Model	Surgex UPS-17202-53R
Category	UPS
Language	English