User Manual
_________________________________________________________________
© 2019 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / surgex.com 1
4. Setting Up UPS Parameters 21
4.1 Factory Default Settings 21
4.2 Changing Default Settings 21
4.2.1 Output Voltage Setting (Item 01) 23
4.2.2 Frequency Converter Enable/Disable (Item 02) 23
4.2.3 Output Frequency Setting (Item 03) 23
4.2.4 Bypass Mode Enable/Disable when the UPS is Off 24
4.2.5 Programmable Outlets Enable/Disable (Item 07) 24
4.2.6 Programmable Outlets Setting (Item 08) 24
4.2.7 LCD Display Direction Setting (Item 09) 25
4.2.8 Acceptable Input Voltage Range Setting (Item 10) 25
4.2.9 Number of External Battery Cabinets (Item 11) 25
5. UPS Operation 26
5.1 UPS input connection 26
5.1.1 LCD Display in Bypass Mode 26
5.1.2 LCD Display in Standby Mode 27
5.2 Turn on the UPS (Put the UPS in On-Line Mode) 27
5.2.1 LCD Display in On-Line Mode 27
5.3 Connect Devices to the UPS 27
5.4 The UPS in Battery Mode 28
5.4.1 LCD Display in Battery Mode 29
5.5 Turn off the UPS 29
6. Interfaces 30
6.1 Serial Interface COM 3 30
6.2 Interface Slot COM 31
7. Emergency Power Off (EPO) 31
8. Maintenance 32
8.1 Cleaning 32
8.2 UPS Storage 32
8.3 Battery Testing 32
8.4 Replacing Batteries 32
To Next Page
Loading...
Need help?
General
