EasyManua.ls Logo

Ametek Thermox WDG-VCM

Ametek Thermox WDG-VCM
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customer MODBUS Map | 7-1
CUSTOMER MODBUS MAP
Sensor
Host
Register Name Data Type Description
1 0 System Alarm Int 32 System alarms reported by the AMEVision
Display User Interface Software
Read Only
1 2 Oxygen Float Oxygen concentration in percentage Writable
1 4 Combustibles Float Combusitble concentration in ppm Writable
1 6 Methane Float Methane concetration in percentage Read Only
1 8 Cell Temperature Float Cell temperature in degree C Read Only
1 10 Box Temperature Float Box temperature in degree C Read Only
1 12 Cell mV Float Oxygen cell in millivolts Writable
1 14 CJ Temperature Float Electronics Temperature (cold junction com-
pensator temp) in degree C
Read Only
1 16 Process Alarm Mask Unsigned Int 32 Process alarm bit mask Writable
1 18 Command Unsigned Int 16 Command to the analyzer Writable
1 19 Command Response Unsigned Int 16 Response to a command
1 20 Oxygen Span Gas Float Oxygen span gas value Writable
1 22 Zero Gas Float Zero gas value Read Only
1 24 Combustible Span
Gas
Float Combustible span gas value Read Only
1 26 Methane Span Gas Float Methane span gas value Read Only
1 28 Data Valid Unsigned Int 16 Datavalid (1 if valid, 0 if not) Read Only
1 29 State Unsigned Int 16 Current state of the analyzer Read Only
1 30 Event Mask 1 Unsigned Int 32 Event Mask 1 Writable
1 32 Event Mask 2 Unsigned Int 32 Event Mask 2 Read Only
1 34 Pressure Float Process Pressure Writable

Table of Contents

Related product manuals