Installation
23
ango Series Audio Controllers
The Volume LED's are used to provide feedback as to which SRS setting is active:
No LED = SRS Off
LED1 = BASS boost
LED 1&2 =Focus
LED 1,2&3 =3D
LED 1,2,3&4 =WOW
Moving from one SRS position to another disengages the original setting i.e. moving from WOW to
BASS BOOST, disengages WOW.
Zone Control
To turn a single Zone ON, press any Source button (or press the Power
Button).
Note: If the Power button is pressed, the zone will turn ON and will remember which source
was previously ON.
To turn a single Zone OFF, press the Power button.
To turn a specific Source ON in all Zones, press and hold any Source button (the selected
source will turn on and play in all zones).
To turn a specific Source OFF in all Zones, press and hold the active Source button.
To Turn All Zones OFF (System OFF), Press the "OFF" button. All zones will be turned off,
and no sources will play.
Note: One minute after an ALL OFF has been performed, the Controller and all Sources will
be powered down
Note: Pressing Source Buttons switches between sources and turns the Source On, but does
not toggle between ON and OFF.
Source Control
The source control functionality outlined below represents "suggested" functions. All source control
buttons (Up, Down, Left, Right, Center and Center HOLD) can be customized via the Controller Menu
for all sources except for the Internal Tuner, which cannot be customized.
Internal Tuner and Audio Server
CD and DVD
NAV Button Internal Tuner AUDIO SERVER
NAV Up SEEK UP NEXT
NAV Down SEEK DOWN PREVIOUS
NAV Left Prev PRESET Prev PAGE
NAV Right Next PRESET Next PAGE
NAV Center (press) AM/FM SELECT
NAV Center (press/hold) Stereo/Mono User Defined 1
NAV Button CD DVD
NAV Up Next TRACK UP
NAV Down Prev TRACK DOWN
NAV Left Prev DISC LEFT
NAV Right Next DISC Right
NAV Center (press) User Defined1 Select
NAV Center (press/hold) User Defined2 Menu
To Next Page
Loading...
Need help?
General
