AMX DAS-T0804-SIG User Manual

Tango Series Audio Controllers
1
Tango Series Audio Controllers
Tango Series Audio Controllers
Overview
The Tango Series of Audio Controllers allow centralized control of common audio equipment for up to 4
or 8 independently controlled audio zones per Controller. Each Tango Controller is capable of
controlling the source via Metreau Keypad, RS-232, IP address (via the optional Ethernet Module), SWT
Speakers (equipped with IR receivers), or the MIO R-4 AUDIO IR remote control. Other sources such as
Satellite Receivers, CD Players, MP3 Players, and any other IR Controlled audio source can be patched
into the RCA source inputs on the rear panel (FIG. 1).
Tango Series Audio Controllers are available in two variations:
 DAS-T0804-SIG (FG1103-01) - Tango 8-Source, 4-Zone Audio Controller
The DAS-T0804-SIG can control 8 sources and distributes audio to 4 rooms/zones.
 DAS-T0808-SIG (FG1103-02) - Tango 8-Source, 8-Zone Audio Controller
The DAS-T0808-SIG can control 8 sources and distributes audio to 8 rooms/zones.
Both Tango Controllers are expandable to 64 zones via Tango Zone Expanders.
FIG. 1 Tango Audio Controllers
Function Buttons
IR Receiver LCD Display Screen
Power Switch & Receptacle
Zone Outputs (4 or 8)
IR Outputs (8)
Expansion Port (RJ45)
RS-232
Paging IN/OUT ports
Light Bar (power status)
LED Level Indicator
Audio Inputs (8)
Audio Outputs (8)
Antenna Inputs
AM
FM

AMX DAS-T0804-SIG Specifications

General

Brand	AMX
Model	DAS-T0804-SIG
Category	Recording Equipment
Language	English