Appendix B - Commands / Messages
68
Tango Series Audio Controllers
Sirius Status Codes
Sirius Status Codes referenced by Status Type:
Sirius Status Codes
Status Index Status Message Notes
0 = Tune Status • 0 = Tune Complete
• 1 = Tune Executed
• 2 = No Tune Executed
1 = Audio Status • 0 = Audio/Data Present
• 1 = Audio/Data Loss
2 = Antenna Connection • 0 = Antenna Present
• 1 = No Antenna Present
3 = Health Status • 0 = Health OK
• Other Value = Sirius Module Err Code
4 = Activation Status • Bit 0 = Individualized (0=No, 1=Yes)
• Bit 1 = Enabled (0=No, 1=Yes)
• Bit 2 = Activated (0=No, 1=Yes)
• Bit 3-7 = For Future Use
8 bit message
Example: 0000 0111
5 = Composite Signal Strength • 0 = None
• 1 = Weak
• 2 = Good
• 3 = Excellent
6 = Satellite Signal Strength • 0 = No Signal
• 1 = Weak Signal
• 2 = Good Signal
• 3 = Excellent Signal
7 = Terrestrial Signal Strength • 0 = No Signal
• 1 = Weak Signal
• 2 = Good Signal
• 3 = Excellent Signal
To Next Page
Loading...
