Setup and Configuration
37
Tango Series Audio Controllers
Options on the Main Menu screen include:
Setup - Accesses the System Setup Mode screen
Backlight - Accesses the Backlight Options screen
About - Accesses the About screen
Exit - Exits the Main Menu
System Setup Mode screen
Select Setup from the Main Menu screen to access the System Setup Mode screen (FIG. 25):
Options on the System Setup Mode screen include:
MRC - Accesses the MRC Setup Mode screen, where you can program sources and adjust
the input attenuation & output gain for each source, as well as configure Paging.
Tuner - Accesses the Tuner Setup screens, where you can set the presets for each tuner
detected.
Clock - Accesses the Clock Setup Mode screens, where you can set the time and view the
alarms that have been set for each room/zone.
Exit - Exits the System Setup Mode screen.
System Setup - MRC Setup Mode screen
Select MRC from the System Setup Mode screen (FIG. 25) to access the MRC Setup Mode screen
(FIG. 26).
The options on this screen include:
Setup - Accesses the MRC Setup Mode Options screen where you can program sources and
adjust the input attenuation & output gain for each source.
Backlight - Accesses the MRC Backlight screen.
About - Accesses the About screen, which displays the firmware version of the Controller,
Zone Expanders and all connected keypads.
FIG. 25 System Setup Mode screen options
Exits this screen
To the Clock screens
To the Tuner screens
To the System Setup Mode scree
The acronym "MRC" stands for "Multi Room Controller", and refers to the Matrix
Audio Controller.
“Tuner” will only be displayed if a tuner module(s) is detected on board the Controller.
To Next Page
Loading...
Need help?
General
