AMX DAS-T0804-SIG - Page 64

Appendix B - Commands / Messages
56
Tango Series Audio Controllers
RS-232 Controller Command Messages (Cont.)
MSBSr,b Set Bass, where:
•‘r’ is the desired room, (1-64)
•‘b’ is the desired bass level, valid values are:
0: level
1....10: -10....-1 dB
11....20: 1....10 dB
Bass Status
- or -
ERR
MGBSr Get Bass, where:
‘r’ is the desired room, (1-64)
Bass Status
- or -
ERR
MSTRr,t Set Treble, where:
•‘r’ is the desired room, (1-64)
• ‘t’ is the desired treble level, valid values are:
0: level
1....10: -10....-1 dB
11....20: 1...10 dB
Treble Status
- or -
ERR
MGTRr Get Treble, where:
‘r’ is the desired room, (1-64)
Treble Status
- or -
ERR
MSSCr,s Select Source, where:
•‘r is the desired room, (1-64)
•‘s’ is the desired source, valid values are:
0: no source selected
1-8: for sources 1 to 8
Source Status
- or -
ERR
MGSCr Get Source, where:
‘r’ is the desired room, (1-64)
Source Status
- or -
ERR
MSSRr,s Select SRS, where:
•‘r’ is the desired room, (1-64)
•‘s’ is the SRS state, valid values are:
0: Off
1: Bass Boost
2: SRS 3D
3: Focus
4: WOW
SRS Status
- or -
ERR
MGSRr Get SRS, where:
‘r’ is the desired room, (1-64)
SRS Status
- or -
ERR