AMX MIO-R4 Instruction Manual

Mio R-4 Setup
7
Mio Modero R-4 Remote
7. If necessary, push out the standard buttons from the front of the top assembly.
8. Place the new keypad in the top assembly and verify the alignment with the guide posts on the PCB.
9. Place the top assembly back down on the PCB and turn the unit over again, exposing the 6 screw points.
10. Tighten the 6 screw points.
11. Install the battery, replace the battery door, and slide the door to lock it in place.

AMX MIO-R4 Specifications

General

Flash memory	32 MB
RAM capacity	64 MB
Certification	FCC, IC, CE, IEC 60950, Japan Approval
Maximum range	30 m
Frequency band	2.4 GHz
Languages support	ARA, CHI (SIMPL), DEU, ENG, ESP, FRE, GRE, HUN, ITA, JPN, KOR, POR, RUS, THA
Number of devices supported	2
Interface	IR Wireless
Input type	Press buttons
Hard buttons	Yes
Product color	Black
Buttons quantity	29
Remote control proper use	-
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Package weight	25 g

Weight and Dimensions

Depth	19 mm
Width	51 mm
Height	240 mm
Weight	20 g