Programming the Mio R-4
List Box Command: My Music
List Box Commands (Cont.)
List View Commands
^LVU Update any view currently looking at this list.
Note: This must be called after changes to list data.
Syntax:
SEND_COMMAND <DEV>,"'^LVU-<view address>'"
Variables:
• view address = the address of the view definition
Example:
SEND_COMMAND Device,"'LVU-3'"
Updates the data list and displays it according to the view definitions located at address 3.
FIG. 24
List Box Command: My Music
To Next Page
Loading...
