Figure 76. MAXDAP-TYPE-C Push Button
After about one second, the LED flashes and a new MAINTENANCE device appears in the list of
available devices, as shown in Figure 77.
Figure 77. MAINTENANCE Drive
Drag and drop the https://github.com/MaximIntegrated/max32625pico-firmware-
images/raw/master/bin/max32625_max32666hsp3_if_crc_dip_v1.0.5.bin file onto the MAINTENANCE
drive. For a pop-up message up asking to copy the file without its properties, click Yes. The following
window (Figure 78) appears while the programmer is being flashed.
To Next Page
Loading...