1. Vital Signs
Summary plots for PPG-SpO
2
, ECG-HR, BioZ-Respiration, and Temperature (Skin/Ambient). See
Figure 66 to select other combinations of signals.
2. ECG + ICG
HR and ICG algorithm output and corresponding data can be viewed here.
3. ECG + RESP
HR and Respiration algorithm output and corresponding data can be viewed here.
4. SpO
2
SpO
2
algorithm output and PPG input data can be viewed here.
5. ECG
HR algorithm output and ECG data can be viewed here.
6. BioZ
Bio Impedance data can be viewed here.
7. BioZ (Q vs. I)
Bioimpedance Q channel data versus I channel data can be viewed here.
8. Accelerometer
Output data from the onboard accelerometer can be viewed here.
9. Measurement 1-6
Raw PPG measurement data can be viewed here for enabled measurements.
Register Tab
The registers tab offers a view of the available internal registers of the onboard MAX86178, MAX30210,
or ADXL367 accelerometer. Registers cannot be modified while the device is actively taking a
measurement. The GUI highlights the registers being changed based on different settings. Modifying the
devices at the register level can break their functionality, and extreme care should be taken when doing
so.
To Next Page
Loading...
Need help?
General