Note: If you enter the same programme number
of the channel that you want to move, “.... channel
services will be replaced. Do you want to continue?”
OSD will be displayed. Press OK to conrm or select
“No” to cancel.
Deleting the Channels in the Channel List
Press “
” or “ ” button to select the channel
that will be deleted.
Press “
” or “ ” button to select the “Delete’’
item on Channel List menu. As seen on
Channel List menu, SELECT is displayed next
to Delete item at the bottom of the screen to
indicate that you must press the OK button to
delete the highlighted channel in the channel
list.
Press the OK button to delete the highlighted
channel in the channel list. Then the message
below appears on the screen:
Press “ ” or “ ” button to highlight the desired
option. If OK button is pressed while “Yes” is
highlighted, the highlighted channel is deleted.
Selecting “No” cancels the deletion.
Renaming Channels
To rename a specic channel, the channel must
be highlighted by pressing “
” or “ ” button.
Then highlight the Edit Name item by pressing
“ ” or “ ” button as illustrated below. Press the
OK button to activate the rename feature.
Now pressing “ ” or “ ” button moves to the
previous/next character. Pressing “ ” or “
” button toggles the current character, i.e., ‘b’
character becomes ‘a’ by “ ” and ‘c’ by “ ”.
Pressing the numeric buttons ‘0...9’ replaces
the highlighted character with the characters
printed above the button one by one as the
button is pressed.
Press the “M” button to cancel the editing or OK
button to save the new name.
Adding Locks to Channels
Channel locking provides a password-protected
access to channels selected by parents. In order
to lock a channel you should know the parental
lock password (default value is set to 0000 in
the factory and can only be changed from the
Conguration menu).
Select the channel to be locked by highlighting
it and select the Lock option by pressing “
”
or “ ” button. When the OK button is pressed,
To Next Page
Loading...
