Anritsu ML2400A Series - Page 101

*ESE? Re turn Event status reg is ter en able mask GPIB 488.2
Syn tax: *ESE?
Re marks: Re turned for mat: <un signed char ac ter>
When con verted to an 8- bit bi nary number, this byte yields the bit set -
tings of the reg is ter.
*ESR? Event status reg is ter re quest
GPIB 488.2
Syn tax: *ESR?
Re marks: Re turn the value of the stan dard event status reg is ter. Af ter wards the
event status reg is ter are cleared. The re turned for mat is: <un signed
char ac ter>. When con verted to a 8- bit bi nary number, this byte yields
the bit set tings of the reg is ter.
*IDN? Re quest de vice iden ti fi ca tion
GPIB 488.2
Syn tax: *IDN?
Re marks: Re turned for mat:
<Com pany name>,<model>,<se rial>,<firm ware ver sion>
*OPC Op era tions com plete
GPIB 488.2
Syn tax: *OPC
Re marks: The ML2400A Se ries gen er ates the OPC event in the stan dard event
status reg is ter when all pend ing op era tions have fin ished. An operation
is complete when all input messages before the command have been
completed and any responses have been read out of the output buffer.
Ex am ple: RGH A, 1; RGH B, 3; *OPC
Will set the Op era tions Com plete bit in the Event Status Reg is ter once
the Range Hold com mands have com pleted.
*OPC? Op era tions com plete Out put '1'
GPIB 488.2
Syn tax: *OPC?
6-14 ML2400A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION