Anritsu ML2400A Series - Page 56

Print
[PRINT]
This se lec tion prints the screen and vari ous op era tional set tings through the
rear panel printer port.
Bat tery
Con trols bat tery setup when the op tional bat tery pack is installed.
AUTO
[BAUTS]
En ables or dis ables the auto matic power off fea ture. Auto matic
power off can be used to con serve bat tery power when op er at ing
from the in ter nal bat tery.
TIME
[BAUTT]
When op er at ing from the in ter nal bat tery, Time sets the number
of min utes that the in stru ment will run be fore pow er ing off in
ab sence of any key activity. En ter a value of 10 to 240 min utes.
STATUS Dis plays the in stalled bat tery type, re main ing ca pac ity (%), es ti -
mated op er at ing time re main ing (min utes), and the bat tery’s full
charge ca pac ity ( mAh ).
4-30 ML2400A OM
SYSTEM MENU OPERATION
Figure 4-7. Sam ple ML2400A Se ries Print out