Chapter 1 — General Information 1-7 Model Options and Accessories
ML248xx, ML249xA MM PN: 13000-00164 Rev. K 1-3
1-7 Model Options and Accessories
ML248xA
The ML248xA Power Meter is no longer available and has been replaced by the ML248xB.
ML248xB
The ML248xB Power Meter is available with either one or two sensor inputs. Model numbers, options, and
accessories are listed below.
Table 1-3. ML248xB Models
Number of Sensor Channels Model Number
Single input ML2487B
Dual input ML2488B
Table 1-4. ML248xB Options and Accessories
Option Description Option/Accessory Part Number
Rack Mount, single unit 2400-82
Rack Mount, side-by-side 2400-83
Front Bail Handle ML2480B-005
(Front Bail Handle cannot be used with Rack Mount Kits)
Rear Panel Mounted Input A ML2480B-006
Rear Panel Mounted Input A and Reference ML2480B -007
Rear Panel Mounted Inputs A, B, and Reference ML2480B -008
Rear Panel Mounted Inputs A and B ML2480B -009
1 GHz Reference ML2480B-015
(Options -06 to -09 are mutually exclusive for any given ML248xB unit)
Front Panel Cover (Cannot be used with rack-mounted
units)
2000-1535
Spare 1.5m Sensor Cable 2000-1537-R
0.3m Sensor Cable 2000-1536-R
Bootload Serial Interface Cable 2000-1544
Table 1-5. ML248xB Accessories
Item Description Part Number
Hard Sided Transit Case 760-209
Soft Sided Carry Case with shoulder strap D41310
To Next Page
Loading...
Need help?
General
