Anritsu ML2480B Series Maintenance Manual

Chapter 1 — General Information 1-11 ESD Requirements
ML248xx, ML249xA MM PN: 13000-00164 Rev. K 1-7
1-11 ESD Requirements
All electronic devices, components, and instruments can be damaged by electrostatic discharge. It is important
to take preventive measures to protect the instrument and its internal subassemblies from electrostatic
discharge.
An ESD safe work area and proper ESD handling procedures that conform to ANSI/ESD S20.20-1999 or
ANSI/ESD S20.20-2007 is mandatory to avoid ESD damage when handling subassemblies or components
found in Anritsu instruments.
Power Sensor Agilent 8478B C, P
Digital Voltmeter (DVM)
±0.0015 % basic 24 hour DCV
accuracy
Agilent 34401A
C
Anritsu Power Sensor
Functions with Agilent 432A.
Cal/zero at 50 MHz
Anritsu MA24xxA (not
MA2411A)
C
Non-magnetic tuning wand with a
screwdriver tip for 6-32 slotted cores
N/A Any common source
C
a. P = Performance Verification Tests, C = Calibration, T = Troubleshooting
Table 1-12. Test Equipment List (2 of 2)
Instrument Critical Specification Manufacturer/Model Usage
(a)

Anritsu ML2480B Series Specifications

General

Brand	Anritsu
Model	ML2480B Series
Category	Measuring Instruments
Language	English