1-8 Service Policy Chapter 1 — General Information
1-4 PN: 13000-00164 Rev. K ML248xx, ML249xA MM
ML249xA
The ML249xA Power Meter is available with either one or two sensor inputs. Model numbers, options, and
accessories are listed below.
1-8 Service Policy
The preferred power meter service policy is to return the unit to the local Service Center for the needed service.
The Service Center will then perform the needed service or return to the factory if needed.
Table 1-6. ML249xA Models
Number of Sensor Channels Model Number
Single input ML2495A
Dual input ML2496A
Table 1-7. ML249xA Options and Accessories
Option Description Option/Accessory Part Number
Rack Mount, single unit 2400-82
Rack Mount, side-by-side 2400-83
Front Bail Handle ML2400A-05
(Front Bail Handle cannot be used with Rack Mount
Kits)
Rear Panel Mounted Input A ML2490A-06
Rear Panel Mounted Input A and Reference ML2490A-07
Rear Panel Mounted Inputs A, B, and Reference ML2490A-08
Rear Panel Mounted Inputs A and B ML2490A-09
(Options -06 to -09 are mutually exclusive for any given
ML249xA unit)
Front Panel Cover (Cannot be used with rack-mounted
units)
2000-1535
Spare 1.5m Sensor Cable 2000-1537-R
0.3m Sensor Cable 2000-1536-R
Bootload Serial Interface Cable 2000-1544
Table 1-8. ML249xA Accessories
Item Description Part Number
Hard Sided Transit Case 760-206
Soft Sided Carry Case with shoulder strap D41310
To Next Page
Loading...
Need help?
General
