Anritsu ML2480B Series Maintenance Manual

Chapter 1 — General Information 1-9 Replaceable Parts
ML248xx, ML249xA MM PN: 13000-00164 Rev. K 1-5
1-9 Replaceable Parts
The following spare parts are available for the power meter. Refer to Chapter 6 for removal and replacement
procedures. Contact your nearest Anritsu Customer Service or Sales Center for price and availability
information.
Table 1-9. ML248xA Spare Parts
Description ML248xA Part No
PSU for ML248xA ND61153
Measurement PCB assembly for ML2487A ND61154
Measurement PCB assembly for ML2488A ND61155
Control PCB for ML248xA ND65070
Front panel assembly all cables and overlay fitted ML2487A. ND61157
Front panel assembly all cables and overlay fitted ML2488A. ND61158
Top Case with gaskets ND50266
Bottom Case with gaskets ND50267
Rear panel assembly for ML248xA ND61159
1 GHz Calibrator Exchange Assy ND69837
ML248xx/9xA RF 1 GHz Calibrator Cable 62212
ML248xx RF 50 MHz Calibrator Cable (without opt. 15) 3-B41256
ML2487A Single Channel Flexi Cable ND68096
ML2488A Dual Channel Flexi Cable ND68097
Table 1-10. ML248xB Spare Parts
Description ML248xB Part No
PSU for ML248xB ND61153
Measurement PCB assembly for ML2487B ND69841
Measurement PCB assembly for ML2488B ND69842
Control PCB for ML248xB ND65070
Front panel assembly all cables and overlay fitted ML2487B. ND69843
Front panel assembly all cables and overlay fitted ML2488B. ND69844
Top Case with gaskets ND50266
Bottom Case with gaskets ND50267
Rear panel assembly for ML248xB ND65073
ML248xx/9xA RF 1 GHz Calibrator Cable 62212
ML248xx RF 50 MHz Calibrator Cable (without opt. 15) 3-B41256
ML2487B Single Channel Flexi Cable ND68098
ML2488B Dual Channel Flexi Cable ND68099
ML248xB/9xA TCPIP Embedded Stack Assy ND65074
1 GHz Calibrator Exchange Assy ND69837

Anritsu ML2480B Series Specifications

General

Brand	Anritsu
Model	ML2480B Series
Category	Measuring Instruments
Language	English