IMGT30017EN 2
1A.3 Installation flowchart
ACTION DATA LOCATION
REMOVE PACKAGING, AND CHECK SUPPLIED COMPONENTS.
CHECK THAT SUPPLY COMPLIES WITH ORDER.
Paragraph 3A.1
PLAN INSTALLATION.
CHECK ENVIRONMENTAL CONDITIONS,
RATED DATA,
COOLING COMPONENTS,
INPUT AND OUTPUT CABLES,
MOTOR COMPATIBILITY AND
THE OTHER TECHNICAL DATA.
SELECT CABLES, FUSES AND THE OTHER POWER DEVICES
Paragraph 2A.3
Paragraph 2A.4
Paragraph 2A.7
Paragraph 3A.4.2
Paragraph 2A.4 Motor Data sheet
Paragraph 3A.4 e 3A.5
CHECK THAT NO RFI FILTER IS FITTED IF DRIVE MUST BE
CONNECTED TO AN IT SYSTEM (WITHOUT GROUND CONNECTION)
Appendix A2
INSTALL GT3000 IN THE ENCLOSURE Chapter 3A
CHECK CABLE INSTALLATION (POWER AND CONTROL) Appendix A2
CHECK CONNECTIONS TO GROUND Appendix A2
CHECK INSULATION OF MOTOR AND MOTOR CABLE
CHECK INSTALLATION
START-UP THE DRIVE Section B, programming of GT3000
To Next Page
Loading...