Answer Drives GT3000 - Permissible Environmental Conditions

GT3000 Technical Data
IMGT30017EN 5
2A.3 Permissible environmental conditions
Table 2A.3 Permissible Environmental Conditions
Operation
Operation: Operate drive installed in a permanent place and protected from adverse weather in accordance with IEC 721-3-3.
Ambient Temperature 0 to 40 °C. (32 to 104 °F) – If ambient temperature is higher than + 40°C (104 °F), decrease the rated
output current by 1% for every °C (1,8°F) (max 55°C - max 131 °F).
Relative Humidity 5 to 95% without condensation
Contamination Levels (Boards with coating) – Chemical gases: IEC 721-3-3, Class 3C2
Solid particles: IEC 721-3-3, Class 3S2
Altitude Up to 1000 m (3280 ft) above sea level. Over 1000 m (3280 ft) above sea level, the rated output current
is decreased by 1% for every additional 100 m (328 ft). Maximum altitude 3000 m (9850 ft).
Vibrations Max 0.3 mm/ 0.012in. (from 2 to 9 Hz), max 1 m/s2 3.28ft/s2 (from 9 to 200 Hz) sinusoidal (Class 3 M1)
Environmental Considerations
• Avoid exposure to corrosive gases – including hydrogen sulfide
• Avoid exposure to strong magnetic fields, nuclear radiation and high levels of RFI from
communication transmitters
Storage
Storage: Store in protective packing and in protected environment in accordance with IEC 721-3-1.
Ambient temperature -25°C to +70°C (-40°F to +158°F)
Relative Humidity Max 95% at 40 °C. - Max 95% at 104 °F.
Atmospheric pressure from 70 to 106 kPa
Vibrations Max 1.5 mm / 0.06in. (from 2 to 9 Hz), max 5 m/s2 / 16.4 ft/s2 (from 9 to 200 Hz) sinusoidal (class 1M3)
Shock max 100 m/s2 (330ft/s2), 11 ms (36fts) (class 1M3).
Contamination Levels Boards with coating – Chemical gases: IEC 721-3-1, Class 1C2
Solid particles: IEC 721-3-1, Class 1S3
Environmental Considerations
• Avoid exposure to corrosive gases – including hydrogen sulfide
• Avoid exposure to strong magnetic fields, nuclear radiation and high levels of RFI from
communication transmitters
Transportation
Transportation: Transport in its protective packing, in accordance with IEC 721.3.2.
Ambient temperature -25 to +70 °C. (-13°F to +158°F)
Relative Humidity Max 95% at 40 °C. - Max 95% at 104 °F.
Atmospheric pressure From 60 to 106 kPa
Vibrations Max 3.5 mm / 0.14 in. (from 2 to 9 Hz), max 10m/s2 / 32.85 ft/s2 (from 9 to 200 Hz) sinusoidal (Class
2M1).
Shock max 100 m/s2 (max 330ft/s2), 11 ms. (36fts)
Contamination Levels Boards with coating – Chemical gases: IEC 721-3-2, Class 2C2
Solid particles: IEC 721-3-2, Class 2S2
Free Fall 250 mm, 0,82 ft (weight lower than 100 kg / 220lb)
100 mm, 0,33 ft (weight higher than 100 kg / 220lb)