GT3000 SIOVA
IMGT30017EN 67
Connection between SIOVA board and GT3000:
Install the SIOVA board near the drive and connect X7 connector of the GT3000 board to K1 or K9 connector of the SIOVA board according the drawing in
the following pages. If it necessary the second SIOVA this must be connected to the free connector (K1 or K9) of the first SIOVA and installed as near as
possible to the first one.
SVSIOS1A SVGT0P3-028. SVSIOS2A SVGT030-166F / SVGT105-170K.
The kit includes:
SIOVA BOARD ELC452264
Connection cable to GT3000 (400mm) ELC40772004
Board support ELC408697
Insulating plate ELC408700
(It must be mounted between the SIOVA board and the board support.
The kit includes:
SIOVA BOARD ELC452264
Connection cable to GT3000 (400mm) ELC40772004
Board support ELC408698
Insulating plate ELC408700
(It must be mounted between the SIOVA board and the board support.
).
SVSIO2A SVGT200F-940M / SVGT200-960K.
The kit includes:
SIOVA BOARD ELC452264
Connection cable to GT3000 (400mm) ELC40772004
Insulating plate ELC408700
NOTE
1) The insulating plate must be mounted between the SIOVA board and
GT3000 plate.
2) SVGT520F-940M / SVGT520-960K. The expansion boards must
be mounted on the master drive.
13
14
K1
K9
444 3
1
XM1
4546 5 7 9 11
121086432
41
42
27
28
151 719 21 23 25
262422201816
2931 33 3537 39
40383 6343230
X7
RL1
RL2
RL3
K2
PS4
X3
1
SW
K3
K1
SIOVA N°1
VU W
PE
SIOVA N°2
K1
K9
N°3 Holes M4
8015
20
1580
50
SIOVA Board support
SIOVA
X7
SHIFT
REMOTECONTROLO PERATOR
Fault
STOP MAN
ON RUN
RESET
Enter
Canc.
AUTO
20 21 22 23 24 25 26 27 28 29 30 31 32 3 334
3 4 5 6 7 8 9 1 0 1112 13 14 15 16 17
7.5
40
70
SIOVA
N°4 FORI M4
N°4 HOLES M4
205
7.5
K5
X7
1 2
RL1
RL2
18 19
XM1A
XM1B
K4
SIOVA Board support
X3
DISP4
K5
K1
Supporto scheda SIOVA
N°3 Fori M4
Supporto scheda SIOVA
To Next Page
Loading...