Here you can select data format from the dropdown list.
Please select separator such as – or /.
There are two options: 24-H and 12-H.
DST Here you can set day night save time begin time and end time. See
Figure 7-24 and Figure 7-25.
Language You can select the language from the dropdown list. Device needs to
reboot to get the modification activated.
HDD Full
There are two options: stop recording or overwrite the previous files
when HDD is full.
Pack
Duration
Here you can select file size. Default setup is 60 minutes.
When you are using one remote control to manage multiple devices,
you can give a serial numbers to the device.
Video
Standard
There are two options: PAL.
7.3.2.2 Encode
Encode interface is shown as in Figure 7-26.
Figure 7-26