Applied Biosystems SimpliAmp Thermal Cycler - Page 15

2.
In the Setup Run screen, touch Open Template, Open Method, or Incubate.
Figure 5 Setup Run screen
a.
Touch Open Template to create a new method using an existing template.
Select from the categories listed in the Select Method Template screen.
Figure 6 Select Method Template screen
b.
Touch Open Method to create a new method using an existing run method.
Select from the methods listed in the Select Method screen.
Note: The Select Method screen opens up if you touch Open Method in the
Home screen or in the Setup Run screen.
Figure 7 Select Method screen
Chapter 3
Create and run experiments on the instrument
Create a new run method
3
SimpliAmp
™
Thermal Cycler User Guide 15