4.
In the Maintenance & Services screen, touch Software Update.
The Software Update screen opens:
Figure 25 Software Update screen
5.
Touch the name of the
le with the new rmware, then touch Update.
6.
Touch Yes to conrm that you want to upgrade.
IMPORTANT! To prevent instrument malfunction and required service, do not
power o the instrument during the upgrade.
When the upgrade process is complete, the instrument will restart automatically.
Use the Self Verication Test feature for the instrument to check the instrument
hardware. The check includes testing the block, heated cover, and other components.
Note: Carry out the Self Verication test periodically or whenever there is an
intermient instrument error.
Figure 26 Self Verification Test screen
Self
Verification
test
Chapter 4 Maintain the instrument
As-needed maintenance
4
36
SimpliAmp
™
Thermal Cycler User Guide