You can congure the following instrument seings by touching Seings on the
Home screen:
Note: The Manage Users buon is visible only when you sign in as an administrator.
·
Instrument Seings: Touch Instrument Seings to set various additional
parameters:
Set the following in the Instrument Seings screen:
Note: The Backup/Restore and Restore Factory Seings are available only when
you sign in as an administrator.
·
Instrument Name: Touch the Instrument Name eld and, using the text editor,
enter up to 25 alphanumeric characters to identify the instrument.
Note: The instrument name cannot have spaces. Separate consecutive characters
with a hyphen or underscore; for example, MyInstrument.
Recommended
instrument
settings
Appendix A Install and connect to a network
Set up the system
A
48
SimpliAmp
™
Thermal Cycler User Guide