ARCBRO Stinger Series - 3. Automatic Function (AUTO); Automatic Mode Interface Overview

Service Support Spirit
Unique Solution WWW.ARCBRO.COM
12
3. Automatic Function(AUTO)
In the main menu, press [F1] to enter the automatic function window, as shown in the figure
below.
Fig. 3.1 Plasma Mode
Flame mode Fig. 3.2 Automatic Function (AUTO) Interface
Active speed
Program name
Function display area
Piercing Hole No.
Kerf
Input/output
indication
Coordinates
Pattern Display
Space
Machining
parameter
Work mode