ENGLISH
10
CONNECTION/PREPARATION
-----------------------------------------------------
Connecting the antenna and the power cable
1 To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
»SATELLITE« antenna socket on the televi-
sion set;
and / or
2a For terrestrial digital stations (DVB-T), plug
the cable of the rooftop, indoor antenna
(passive or active indoor antenna with its
own power supply) into the antenna socket
»ANT IN« on the television set;
or
2b For digital stations of the cable TV network
(DVB-C), plug the antenna cable into the
antenna socket »ANT IN« on the television
set.
Note:
7
When connecting an indoor antenna you
may have to try it out at different positions
until you get the best reception.
3 Connect the power cable to the »AC IN«
socket on the television.
4 Plug the power cable into the wall socket.
Note:
7
Plug the appliance into the mains socket
only after you have connected the external
devices and the antenna.
7
Do not use an adapter plug or extension
cable which does not meet the applicable
security standards. Do not tamper with the
power cable.
2
3
1
4
To Next Page
Loading...
