arcelik A75 D 895 A - Wired Network Settings

ENGLISH
88
Wired network settings
There are two ways of making the wired net-
work settings.
A Automatic connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem auto-
matically.
B Manual connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
Automatic connection
Most home networks are Dynamic Networks.
If you have a dynamic network, you must use a
DSL modem that supports DHCP. Modemsand
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatical-
ly, and thus you are not required to enter those
values manually. Your TV will automatically
connect to the network.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
NETWORK SETUP
-------------------------------------------------------------------------------------------
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Address«, »Netmask«, »Gateway« and
»DNS« values (ISS) from your Internet Service
Provider.
1 Press »
)
« on Home Screen.
2 Select Settings »
)
« and confirm with »

«.
3 Select »Network and Internet« with »
V «
and confirm with »

«.
4 Select the line »IP Settings« with »
V « and
confirm with »

«.
5 Use »
V « or » Λ « to select »Static« and
confirm with »

«.
6 Enter the »IP Address« and select »
« from
the screen archive and confirm with »

«.
7 Enter »Gateway« and select »
« from the
screen archive and confirm with »

« .
8 Enter »Network prefix length« and select »
« from the screen keyboard and confirm
with »

« .
9 Enter »DNS1« if available and select »
«
from the screen keyboard and confirm with
»

«.
10 Enter »DNS2« if available and select »
«
from the screen keyboard and confirm with
»

« .
– Successfully saved! message shall be
displayed.
11 Press »
r
« to return to the previous menu or
press »
T
« to return to Home menu.