ENGLISH
50
USB RECORDING
-------------------------------------------------------------------------------------------
6 When formatting is complete, select the size
you want to reserve for time shifting accord-
ing to the size of the external data medium
with »
V
« or »
Λ
« and confirm with »
« .
– The external data medium is manually
configured and the message »Disc Set-up
Complete« is displayed.
7 Press »
a
« to return to the broadcast.
“Pausing” time shift and contin-
uous recording programmes
You can pause any programme you are watch-
ing. For instance, if the phone rings when you are
watching a movie, you can pause the movie and
resume it after the call without missing anything.
The last scene that was frozen shall be dis-
played and time shift is recorded into the exter-
nal data media.
With the continuous recording feature, TV re-
cords the channel you are currently watching
as much as the time shift memory you create
on external data media. Thus, you can use the
rewind feature on the channel you are watching.
Note:
7
Use an external USB Disk driver for an
uninterrupted “Permanent Time Shift”.
1 Press »
w
« during the broadcast.
– Television picture is paused and delay
time is displayed.
2 To resume the broadcast, press
»
w
«.
– The system continues recording the broad-
cast while you are watching it.
Note:
7
The following functions can be used in the
Time Shift mode.
– –
Fast rewind, press »
u
« several times for
the desired speed;
–
Fast forward, press »
v
« several times for
the desired speed;
–
To pause, press »
w
«.
3 To stop time shift, press »
«.
Recording Programmes
You can record a TV channel. Programmes are
recorded onto the external data media and the
archive is managed via television.
A memory of 44 MB up to 110 MB is required
for a 1 minute record.
1 Select the channel with »1…0« or
»
« to start recording.
2 Press »
« on remote control.
– Recording information shall be displayed:
Recording symbol, channel name, pro-
gramme and recording time.
– This information will disappear after a
short while, the »REC« symbol and the
recording time appear in the lower left
corner of the screen.
3 Press »
« to stop recording.
Notes:
7
When recording is complete, it will auto-
matically be stored on the external data
media.
7
If you remove the external data media
during recording, then the recording is
cancelled automatically and no data is
recorded onto the external data media.
Switching the TV to stand-by during
recording
1 Select the channel with »1…0« or
»
« to start recording.
2 Press »
« on remote control.
3 To switch the TV to stand-by, press »
8«.
To Next Page
Loading...
