arcelik A75 D 895 A - Setting up Antenna-Connected Analogue Television Stations Manually

109
ENGLISH
Analogue
Channel Scan
Update Scan
Analogue Manual Scan
9 The scan starts and the number of analogue
channels found is displayed in the menu.
– Scanning may take several minutes
depending on the number of television
stations received.
10 Press »
a
« to return to the previous menu,
press »
H
« or to return to TV broadcast
orpress »
p
« to return to Home menu.
Setting up antenna-connected
analogue television stations
manually
1 Press »
H
« to return to the TV mode.
2 Select »Source« with »
)
« and confirm with
»

«.
3 Select »ATV« and press »

« to confirm.
4 Press »
)
« and select »Settings« with »
>
«
and confirm with »

« .
5 Confirm »Channels and Inputs« with »

«.
6 Select »Channels« and confirm with »

«.
– Channel menu shall be displayed.
7 Select »analogue« and confirm with »

« .
8 Select »Analogue Manual Scan« with »
V «
or »
Λ « and press »

« to confirm.
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Analogue
Channel Scan
Update Scan
Analogue Manual Scan
9 Select »Start Frequency (MHz)« with »

«
and enter the frequency you want to scan
with »1...0«, select »

« on the screen
keyboard and confirm with »

« .
10 To scan upwards from the Frequency you
entered, select »Scan Up«; to search down-
wards, select »Scan Down« with »
V « or
»
Λ « and confirm with »

« .
11 The scan starts and the number of analogue
channels found is displayed in the menu.
– Scanning may take several minutes
depending on the number of television
stations received.
12 Press »
a
« to return to the previous menu,
press »
H
« or to return to TV broadcast
orpress »
p
« to return to Home menu.