arcelik A75 D 895 A - Detailed Channel Settings; Automatic Search for Single Satellite Con- Nected Digital Television Stations

ENGLISH
92
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Automatic search for single sat-
ellite connected digital television
stations
New satellite channels are added or satellite
data is changed frequently. Therefore, we rec-
ommend you to run auto scan function fromtime
to time.
All transponders are scanned for new channels.
Important:
7
If there is a direct cable connection from
your satellite antenna to the TV, if there is no
common satellite antenna switchboard, you
need to search for a single cable.
1 Press »
H
« to return to the TV mode.
2 Select »Source« with »
)
« and confirm with
»

«.
3 Select »satellite« and confirm with »

«.
4 Press »
)
« and select »Settings« with »
>
«
and confirm with »

« .
5 Confirm »Channels and Inputs« with »

«.
6 Select »Channels« and confirm with »

«.
– Channel menu shall be displayed.
7 Confirm »Satellite« with »

«.
8 Confirm »Channel Installation Mode« with
»

«.
9 Select »Satellite (Standard)« with »
V « or
»
Λ « or if you are using an operator, select
»Satellite (Operator Mode)« and confirm
with »

«.
10 Press »
a
« to return to the previous menu.
11 Use »
V « or » Λ « to select »Automatic
Channel Scan« and confirm with »

«.
– Automatic Channel Scan menu shall be
displayed.
12 Select »Other« with »
V « or » Λ « and press
»

« to confirm.
Automatic Channel
Scan
Proceed
Other
13 Select »Single« with » V « or » Λ « and press
»

« to confirm.
Automatic Channel
Scan
Single
Tone Burst
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
14 Confirm »Current Satellite« with »

«.