Archos 404 - PRODUCT CARE AND MAINTENANCE; Device Handling and Care; Hardware Reset Procedure

10
The battery of your ARCHOS
™
device charges via your
computer’s USB port:
plug the Archos
™
USB Cable into your ARCHOS
™
device
(which is off),
plug the Archos
™
USB Cable into your computer (which is
turned on),
the ARCHOS
™
device will turn on and start charging.
A lightning bolt symbol will ash over the battery icon in the
task bar while the battery is charging: .
The CHG indicator LED is on while the battery is charging;
it will blink when the battery is fully charged.
PrOduCT Care
CARING FOR YOUR ARCHOS
™
DEVICE
Your ARCHOS
™
device is an electronic product that needs to be
treated with care:
Do not subject it to unnecessary shock or vibration.
Do not subject it to heat, keep it ventilated (especially when
connected to a computer).
Keep it away from water and excessively humid areas.
Keep it away from high electromagnetic elds.
Keep any connected wires neatly arranged: the device could
fall if a cable is accidentally pulled by a child.
Do not open it up. There are no user-serviceable parts
inside. Opening will void your warranty.
HARDWARE RESET
In the event that your ARCHOS
™
device freezes operation
(due to electrostatic phenomena, for example), you can reset it
by pressing the button for 15 seconds.
1.
2.
3.
•
•
•
•
•
•
•
•