Archos 404 - 8.4 RECORDING AUDIO (EXTERNAL SOURCE); External Audio Recording Procedure

76
Key Delay
Change the delay between the emission of each digit of
a channel. You may need to adjust this if the ARCHOS
™
device seems to send only half the digits of a channel or
more digits of a channel. Example: Adjust the key delay
and retest channel select if it sends channel 2 instead of
12 or sends 112 instead of 12.
8.4 reCOrdIng audIO (exTernal sOurCe)
Connect the AV cable to an audio source (hi-, turntable,
boombox, etc.) and then the other end to the IN connector of
the DVR Station or DVR Travel Adapter.
In the Home Screen, highlight the AudioCorder icon
and press OK to display the pre-recording screen.
Highlight the Settings menu item and press OK to enter
the AudioCorder settings screen (See AudioCorder Settings
Screen ).
Select ‘Analog Line-In’ as the source. Press to go back to
the pre-recording screen.
Adjust the recording level using the left/right buttons.
( / only adjust the headphones’ volume, not the recording
volume)
Press OK or choose the Start recording menu item to start
recording.
You can pause and resume your recording at any time by
pressing OK.
Press to stop recording.
You can also start recording to a new le directly by choosing
the Save le and start a new recording menu item while you
are recording.
•
-
1.
2.
3.
4.
5.
6.