6 Local Control Panel
(continued)
6-26
C232-302-401/402/403/404-603 / C232/EN M/A23
Readout of the operating
data memory
The operating data memory contains stored signals of actions that occur during
operation, such as the enabling or disabling of a device function. A maximum of 100
entries is possible, after which the oldest entry is overwritten.
Control Step / Description Control
Action
Display
0 Select the entry point for the operating data
memory.
Oper/Rec/OP_RC
Operat. data record.
1 Press the ‘down’ key to enter the operating
data memory. The latest entry is displayed.
Oper/Rec/OP_RC
01.01.97 11:33 ARC
Enabled USER
No
2 Press the ‘left’ key repeatedly to display the
entries one after the other in chronological
order. Once the end of the operating data
memory has been reached, pressing the ‘left’
key again will have no effect.
Oper/Rec/OP_RC
01.01.97 10:01 PSIG
Enabled USER
Yes
3 Press the ‘right’ key to display the previous
entry.
Oper/Rec/OP_RC
01.01.97 11:33 ARC
Enabled USER
No
4 Press the ‘up’ key at any point within the
operating data memory to return to the entry
point.
Oper/Rec/OP_RC
Operat. data record.
To Next Page
Loading...