Chapter 3 Auxiliary Operations
HA-8190V 3-30
3.8.3 Printing a List of Abnormal Results
The list of abnormal results contains the measurement numbers and messages of the results for which “Abnormal
Fraction” appeared on the chromatogram reports. You may use the lists to determine causes of inaccurate measurement
results. Each list contains abnormal results that were obtained on a specific day.
a On the standby screen, touch , <6. Print menu> and <3. Abnormal results> in that order.
b Set the setup items.
• See the table below.
c Touch .
• Printing will start.
• The [Print menu] screen will appear again when printing is
complete.
d Touch to return to the standby screen.
REFERENCE:
Printed report example: See “2.9.4. List of Abnormal Results (Default: Not print)” on page 2-48.
Messages: See “5.4. Abnormal Result Messages” on page 5-22.
OK
REFERENCE:
If "Not found" appears on the display:
No match is found for the specified date. Touch to return to the screen shown in step b.
To stop printing, touch or .
Setup item Description
Date (DD-MM-YY) Set a measurement date.
Settable range: 01-01-2000 to 31-12-2099
Meas. mode Select the measurement mode in which abnormal values you want to include in the list
occurred.
Fast & Variant: Both measurement modes
Fast: Fast mode
Variant: Variant mode
OK
HOME
To Next Page
Loading...
