HA-8190V 1-11
1.2 Unpacking
1.2.6 Tool Kit
h Joints 12 For eluent nozzles, M6 flat seal fitting 2, push screws and ferrules,
3 per pack
1
i Joints 23 For hemolysis washing solution nozzle, M6 flat seal fitting 3, push
screws and ferrules, 2 per pack
1
j Cover plate O-ring presser plate for piercing nozzle 1
k Spare tube (for column IN) 0.25 mm (i.d.), 9.5 cm 1
l Spare tube (for column OUT) 0.25 mm (i.d.), 8.0 cm 1
m Spare tubes (for pinch valves) 2 mm (i.d.) 4 mm (o.d.), 3 per pack 1
n Push screws (circle type) For column IN/OUT tubes, 5 per pack 1
o Nozzle adjusting block For service person use 1
p Aluminium packs For maintenance when the instrument is not to be used for extended
periods of time
3
Item Description Qty.
Double open end wrench 6-8 1
Double open end wrench 10-13 1
Phillips screwdriver No.2, insulated plastic 1
Stubby screwdriver No.6200-1, insulated plastic 1
Stubby screwdriver No.1200-2, insulated plastic 1
Tweezers AA L125 1
NOTE:
Do not use these tools for any parts of the instrument unless otherwise specified in the operating manual.
Properly store and use the tool kit according to regulations at your facilities.
No. Item Description Qty.
To Next Page
Loading...
