Arkray HA-8190V - Disconnecting the Tubes, Sensor Cord and Cables

HA-8190V 1-41
1.6 Relocation
1.6.4 Disconnecting the Tubes, Sensor Cord and Cables
Remove the bottle for liquid waste, hand-held barcode reader and external device from the instrument.
Prepare: Protective gloves
1 Remove the bottle for liquid waste.
a Disconnect the drain tubes from joints “D1” and “D2” on the rear panel.
b When using the optional liquid waste bottle, disconnect the fluid level detection sensor cord from the DRAIN
terminal on the rear panel.
2 Remove the hand-held barcode reader and external device.
When the hand-held barcode reader and/or external device are connected to the instrument, disconnect their cables
from the B.C.R and/or DATA OUT terminals on the rear panel.
 Wear protective gloves to prevent exposure to pathogenic microbes.
 Discard used protective gloves and liquid waste in accordance with local regulations for
biohazardous waste.