Arthrex Highspeed 200 User Manual

DrillSaw Highspeed 200™ User’s Guide
DFU-0225-2 Rev. 0 Page 4 of 58
21. Before starting operation again: Wait until the motor and cable are completely
dry. Moisture in the plug or motor can lead to a malfunction. (short circuit).
22. Position the foot control unit, where it cannot be pushed unintended.
1.2 Symbols Definition
Safety Sign
Follow operating
instructions
Caution: Federal law
restricts this device
to sale by or on the
order of a physician.
On/Off (push-push)
Fragile, handle with
care
Caution / Precaution
This side up
Keep dry
Temperature limits
for storage and
transport
Electrical hazard,
dangerous voltages
are present. Never
attempt to repair the
equipment. Only
trained service
personnel may
remove the cover, or
obtain access to
system components.
Atmospheric
pressure limitation
for storage and
transport
Alternating current
Humidity limits for
storage and
transport
Fuse
Foot control unit
connection

Arthrex Highspeed 200 Specifications

General

Brand	Arthrex
Model	Highspeed 200
Category	Saw
Language	English