DrillSaw Highspeed 200™ User’s Guide
DFU-0225-2 Rev. 0 Page 8 of 58
WARNING!
Misuse may damage the AR-200 and may cause risks and hazards for patients,
users and third parties.
WARNING!
This device is only for use under the supervision of a trained and licensed
physician. This device should not be used by untrained personnel or used for
indications other than those described in this User’s Guide.
2.4 Set Composition
The AR-200 Set includes:
• AR-200C Console (CE0086)
• AR-200M Motor with cable , with AR-300 coupling (CE0086)
• AR-200SP Spray Clip (CE0086)
• OEM06202400 Foot Control Unit S-N1 with handle (CE0297)
• OEM04364100 Irrigation Tubing Set (3 pieces) (CE0481)
• OEM04005900 Stand (CE0086)
• OEM06177800 Motor support (CE0086)
• WH013437000-01 Power Cord with a European Plug (CE0086)
• WH028214000-01 Power Cord with a US Plug (CE0086)
The AR-200M-ISO includes:
• AR-200M-ISO Motor with cable, for ISO saw attachments (CE0086)
• OEM04006800 Locking Pin (CE0086)
Accessories for AR-200M-ISO motor:
• 10100801 AR-200 - ISO SAW S-8R RECIPROCATING (CE0297)
• 10100802 AR-200 - ISO SAW S-8O OSCILLATING (CE0297)
• 10100803 AR-200 - ISO SAW S-8S SAGITTAL (CE0297)
• OEM04725700 AR-200 - SAWBLADE F/ISO SAW R-30 (CE0123)
• OEM04725900 AR-200 - SAWBLADE F/ISO SAW R-20 (CE0123)
• OEM04726000 AR-200 - SAWBLADE F/ISO SAW R-15 (CE0123)
• OEM04726100 AR-200 - SAWBLADE F/ISO SAW S-10 (CE0123)
• OEM04726200 AR-200 - SAWBLADE F/ISO SAW S-6 (CE0123)
• OEM04800400 AR-200 - SAWBLADE F/ISO SAW O-15 (CE0123)
• OEM04800500 AR-200 - SAWBLADE F/ISO SAW O (CE0123)
To Next Page
Loading...
General