DrillSaw Highspeed 200™ User’s Guide
DFU-0225-2 Rev. 0 Page 37 of 58
5.1 Changing the Program
1. Select menu - Program
2. Next program - press PLUS button
3. Previous program - press MINUS button
5.2 Changing the Speed
When the safety speed (15,000 rpm for AR-200M / 40,000 rpm for AR-200M-ISO)
is reached, an audible signal (safety stop) sounds.
Keeping PLUS / MINUS depressed activates the repeat function and the values
are continuously increased / decreased.
1. Select menu - Speed
2. Increase speed - press PLUS button
3. Decrease speed - press MINUS button
To Next Page
Loading...
General