Ashida ADR141A - Page 111

ADR141A /
ADR241A
Doc
ID
: ADR241A
_IM_01
Ref ID : ADR241A/IM/UG
Rev No. : 02
Page No.
:
111
of 1
50
IP>> Delay = 00.10
IE>> Delay = 00.10
This window shows the set values of OC HF Delay, and EF HF
Delay selection.
Press the right arrow key () to move to the next option.
CT Sec : 01 A
CT Pri : 0100 A
This window shows the set CT Secondary and PT Secondary
Selection.
Press the right arrow key () to move to the next option.
Test Block = NO
Trip Ckt. = NO
This window shows the set Test Block and Trip Ckt selection.
Press the right arrow key () to move to the next option.
Ann Type = 001
Ann Cont = HR
This window shows the set Ann Type and Ann Cont..
Selection.
Press the right arrow key () to move to the next option.
Trip Cont = HR
BF Cont = HR
This window shows the set Trip Cont and BF Cont. Selection.
Press the right arrow key () to move to the next option.
BF Delay = 200
Com Port = USB
This window shows the set BF Delay and Com Port
Press the right arrow key () to move to the next option.
Set Parity = None
Baud Rate = 57600
This window shows the Set Parity and Baud Rate
Press the right arrow key () to move to the next option.
Relay Setting