Ashida ADR141A - Environment and CE Marking; Environmental Operating Conditions; CE Marking Compliance Standards

ADR141A /
ADR241A
Doc ID : ADR241A_IM_01
Ref ID : ADR241A/IM/SGI
Rev No. : 02
Page No. : 9 of 150
Environment
The equipment is intended for indoor installation and use only. If required to be used in an
outdoor environment then it must be mounted in a specific cabinet or housing which will
enable it to meet the requirements of IEC 60529 with the classification of degree of
protection IP52 (dust and splashing water protected, with optional cover).
Pollution Degree 2 Compliance is demonstrated by reference to safety standards.
Altitude Operation up to 2000m
IEC 60255-27:2005
EN 60255-27: 2005
CE MARKING
Directives:
Compliance demonstrated by reference to safety standards