Conguring the Unit via its Web Interface
Routing
ENC 1201 Version 1.0 Page 42
Status
Shows the connection status:
NONE This input on the ENC 1201 is not connected to any Dante output. No
subscription available.
DYNAMIC This input is connected and in use. “Dynamic” is the default setting for
point-to-point subscriptions.
SUBSCRIBE SELF This input is connected to one of the ENC 1201’s outputs.
MANUAL A manually congured ow—indicates an AES67 subscription.
STATIC A static congured ow—indicates a multicast-ow subscription.
NO TX The TX (transmitting) channel on the external device is not active.
UNRESOLVED The selected transmitting device is not visible on the network (it may
have been removed or turned o).
Flow
To maximize the eciency of the network, Dante bundles groups of 4 individual connec-
tions into so-called “ows”. This behavior can be changed with “Dante Channels Per Flow”
(p.26).
This item displays information about the ow to which this channel belongs. The informa-
tion is displayed as follows: {ow-id} ({samplingrate}/{encoding})
Example: 1 (48000/PCM32).
To Next Page
Loading...
Need help?
General